You are now leaving the Lorex for Business website. Would you like to continue to Lorex’s consumer site?
Product Features
- Long reach Ethernet & PoE extension over existing coaxial cable
- Data + Power over coaxial cable
- Data distance up to 1000m
- 100Mpbs Full Duplex
- PoE, PoE+, Extra PoE (Max. 60W PoE output, ECP-01T model only with DC Power adapter)
- LED Indication (Data, Power)
- Plug & Play
- Support PoE, PoE+ Input (25.5W) from PoE Switch / PoE NVR (ECP-01R model only)
- Slim design
Save significant time and reduce hassle, as there's no need for new cable installations; existing cables can be repurposed for Ethernet and PoE transmission. This approach not only saves money by eliminating the need to purchase new cables but also promotes environmental sustainability by reusing existing resources instead of discarding them.
SAVE TIME
SAVE MONEY
SAVE ENVIRONMENT
The ECP-01 Series are high-speed, long-distance Ethernet & PoE extenders that enable the transmission of Ethernet signals and PoE up to 400m through coaxial cables in various situations. They offer a cost-effective and time-saving solution for migrating existing analog systems to IP-based systems, as the ECP-01 series supports easy installation utilizing existing coaxial cables. With the long-distance transmission feature, these devices easily overcome the 100-meter distance limitation and significantly reduce construction costs compared to fiber optic configurations.
Connection Diagram
*Transmission distance may vary depending on the type and quality of cable, use of power and environmental condition.
Product Specifications
Model | ECP-01T | ECP-01R | |
---|---|---|---|
Interface | |||
Coax | 1 x 75Ω BNC (Female) - Ethernet over Coax (B-LinX |
||
Ethernet | 1 x RJ45 - 100 Base-T | ||
Transmission Rate | 100Mbps Full Duplex (100Mbps between Intercoax devices) |
||
Transmission Distance | |||
Ethernet | up to 400 m when 100Mbps is used up to 1000 m when 10Mbps is used (5C-HFBT, RG-59 or better) |
||
PoE (PoC) | Up to 400meter (RG-59, RG-6) | ||
LED Indication | Ethernet | 1 x Link (Yellow) / 1 x ACT (Green) | |
Power | |||
Input | B-Linx or DC48V~57V | PoE Switch or DC48V~57V | |
PoE Output | IEEE802.3af (PoE), IEEE802.3at (PoE+), Extra PoE up to 60W with 57V Power Adaptor |
PoE Not Supported PoC Only |
Model | ECP-01T | ECP-01R | |
---|---|---|---|
Mechanical | |||
Dimension | 83(L) x 51(W) x 24(H)mm | ||
Weight | 52g | ||
Environment | |||
Operating Temp | -20 ~ 60°C | ||
Storage Temp | -30 ~ 80°C | ||
Relative Humidity | 10% ~ 90% | ||
Compliance | |||
Certification | FCC, CE, KC, RoHS | ||
Surge Protection | IEC 61000-4-5 4kV(1.2 / 50us), 2kA(8 / 20us) |
What's Included
Package Contents:
ECP-01T
(Transmitter)
ECP-01R
(Receiver)
Manual
Product Support
ALP-ECP-01T/R - Single Port Ethernet over Coax Transmitter / Receiver